FASERFIX BIG BLS drainage channel as prefabricated reinforced concrete part
IDEAL FOR: extreme loads in basically all concrete pavement areas, LAU facilities, air traffic areas, port facilities/container terminals, container terminals with "ReachStacker" loads, industrial and logistics areas, tunnel drainage, heavy-duty traffic areas also in combination with precipitation water treatment.
YOUR BENEFITS WITH FASERFIX BIG BLS
PRECAST REINFORCED CONCRETE PART TYPE I ACCORDING TO EN 1433
- steel-reinforced concrete stretcher already integrated
- no formwork, reinforcement and in-situ concrete work required
- savings of 2 m sealing joint per metre of channel
= Cost savings
COMPONENT IN 4 AND 5 M LENGTHS
- high installation performance
- 75 % or 80 % fewer channel butt joints (compared to 1 metre construction length)
- 75 - 80 % fewer maintenance joints in the WHG area
= Cost savings | Time savings
LOAD BEARING CAPACITY ACCORDING TO INTERNATIONAL PARAMETERS
= Longevity | Quality assured
LOAD BEARING CAPACITY ACCORDING TO INTERNATIONAL PARAMETERS
- LCN airport categorisation according to ICAO
- up to 100 tons axle load
- navigable for large aircrafts and reach stackers
= Longevity | Quality assured
CERTIFICATES AND APPROVALS
- tested statics for channel construction and foundation design
- no additional external statics required
- with general building authority approval (abZ) by DIBt (Z-74.4-141)
- with ASR performance test
- practical and realistic installation situations
= Cost savings | Quality assured
MATERIAL: LIQUID-TIGHT CONCRETE
- FDE = liquid-tight concrete according to penetration test
- highest load capacity due to strength class C 60/75
- exposure class: XF4, XC4, XM2, XD3, XA2
= Performance assured | Quality assured
FACTORY-MADE PE EXPANSION JOINT INSERT
- full-surface absorption of thermal stresses in longitudinal direction
- expansion joint insert provides a stop for the PE round cord of the sealing joint
- less consumption of sealing material
= Cost savings | Performance assured
ANGLE HOUSINGS
- 16-fold fixing possibility of the grating per metre (incl. 8-fold with optional screw connection)
- 40 mm insertion depth
= Quality assured
THE SYSTEM IN DETAIL
Prefabricated reinforced concrete part made of liquid-tight concrete, strength category C60/75 with steel- or stainless steel angle housing. 16-fold fixing possibilty through boltless-locking system SIDE-LOCK and additional fixing possibility. Length 4 or 5 m
Grating made of ductile iron EN GJS-500-7, with 8-fold boltless locking system SIDE-LOCK and addtional 8-fold fastening possibility per metre
prefabricated PE-expansion joint insert
prefabricated PE-expansion joint insert
Trash box with PE-HD-pipe and galvanised mud bucket
End cap closed
End cap closed
